SOLD on Jun 15, 2026

Elite Dealer

1932 Ford Hi-Boy

Michigan

$54,995

Vehicle Details

Make

Ford

Model

Hi-Boy

Year

1932

Mileage

345 miles

VIN

AMS45261

Body Type

Convertible

Transmission

Automatic

Fuel Type

Gasoline

Engine

460 V8 Big Block Stroked to 500ci

Description

1932 Ford Hi-Boy Brookville Steel Roadster – Professionally Built, 500 cu.in. Ford Big Block Every rodder’s dream: this 1932 Ford Hi-Boy Roadster is an all-steel Brookville body build with just 345 miles since completion. Professionally built with no expense spared, it’s powered by a tire-frying 460 Ford V8 stroked to 500 cubic inches by Bob Valin Motorsports, loaded with top-tier performance components, and presented with meticulous detail.

Drivetrain & Performance 460 Ford big block stroked to 500 cu.in. with offset-ground crank and 440 Chrysler 6-pack rods Block #DOVE-1 (possible 4-bolt Super Cobra Jet) Aluminum Motorsport large-port heads with matching polished intake manifold Hydraulic cam (.520 lift) with rumbling exhaust note Custom 2.25” headers feeding 4” chrome lake pipes with V-clamp quick-disconnect mufflers 4500 Dominator carb #93772 Crane roller rockers, high-performance retainers and springs Milodon full-length 10+ quart oil pan Meziere polished electric water pump, chrome overflow, aluminum radiator Mallory electronic ignition, Hyfire, Blaster coil, Unilight distributor Built and detailed C6 automatic transmission with shift kit and Lokar lock-out shifter Ford 9” rear end with 3.23 gears, strengthening truss, and triangulated 4-bar Chassis & Suspension Tubular ’32 retro rails with custom, molded frame and smoothed welds Super Bell dropped I-beam axle with chromed spindles, 4-bar, and steering assembly Polished aluminum Aldan adjustable coilovers (rear) Front: Michelin 145-SR15 on polished American 5-spokes Rear: LT315/70R15 Lightning Performance tires on 10.5” wide polished American 5-spokes Brakes Polished aluminum Wilwood disc brakes – 11” front, 12” rear Stainless braided and solid lines with power dual master cylinder under floor Exterior All-new Brookville steel body Finished in hammered satin black paint Dan Fink custom chrome ’32 grille with chrome nerf bar and polished Moon 3.5-gallon gasser tank Custom 3-piece hood and side panels Guide 8.25” teardrop headlights with integrated turn signals Teardrop taillights with blue-dot lenses Chrome windshield frame and posts, dual mirrors Hidden hinges and steering drop box for legroom Chrome 2” rear bumper, large polished stainless rear fuel tank ($1,022) Interior Rolled and pleated bench seat with adjustable slides Antique Kenny Bell 4-spoke chromed steering wheel on chrome column Brown loop carpet Full Autometer Pro Comp II gauge set – 5” tach with adjustable rev limiter, speedo, and 2.75” auxiliary gauges (oil, temp, volts, fuel) Key Highlights Just 345 miles since professional build Show-level detailing throughout – every component polished or chromed Tire-frying big block performance matched with highway-friendly gearing Built with all top-tier parts – no corners cut

Classic Ford Coupe Buyer's Guide

Full guide

Jim Vasquez

Hot Rods

1932–1948

~5 min read

Updated Apr 2026

Definitive buyer's guide for classic Ford Coupe 1932-1948. Pre-war and post-war coupe variants, hot rod platform fundamentals, frame and body inspection, current pricing.

This guide covers

✓ 10-point inspection checklist

✓ Common issues & what to avoid

✓ In-person inspection guide

✓ Market pricing by year & condition

✓ 5 FAQs answered

✓ History & fun facts

Read the Full Hi-Boy Buyer's Guide

Ford Hi-Boy Market Overview

Based on 6 Ford Hi-Boy listings currently on ClassicCarsArena.com

Listed Now

$48,162

Avg. Asking Price

1929–1932

Year Range

Price Position on Our Site — Average Range

This car: $54,995

Low: $29,995 High: $65,995

Transmission Distribution

Automatic 83% ◄

Data from ClassicCarsArena.com listings Browse all 6 listings →

Classic Ford Coupe Buyer's Guide

The Ford Coupe — particularly the iconic 1932-1934 cars and the post-war 1946-1948 cars — represents the foundational platform of American hot rodding. The 1932 Ford with its flathead V8 launched a tradition that defined American performance culture for the next ninety years, and the 1933-1934 cars refined the formula. Period-correct flathead V8 power, chopped tops, channeled bodies, and traditional kustom kulture aesthetics define the genre. Whether you're hunting an original-condition Deuce coupe for restoration or a chopped-and-channeled period-correct hot rod from a recognized builder, the Ford coupe market is one of the most active and most actively-judged segments in the entire American collector hobby. The Goodguys circuit, the Grand National Roadster Show, and SEMA Battle of the Builders all maintain build-quality standards that separate the legitimate traditional builds from the hobby work.

What to Check Before Buying

✓

Verify body style code on firewall dataplate — Three-window vs Five-window vs Standard Coupe distinction is critical. Different collector trajectories.

✓

Inspect frame at body mount points — Pre-war frames rust at body mount cross-members. Probe with screwdriver from underneath.

✓

Probe wood inner body framing on pre-1939 cars — Pre-1939 Ford bodies have wood inner framing. Wood rot = $5,000-$15,000 specialist coachbuilding repair.

✓

Examine running boards and fender attachment — Running boards rust where they meet body. Fender attachment points are universal rust zones.

✓

Check rumble seat (if applicable) for rust — Rumble seat coupes have additional rust concerns at rear deck. Lift rumble seat for inspection.

✓

Verify flathead V8 vs OHV V8 if applicable — Original 1932-1953 Ford coupes used flathead V8. Hot rods often have post-1954 OHV V8 swaps.

✓

For Deuce coupes (1932), demand specialist authentication — Original 1932 Ford coupes are blue-chip hot rod platform. Replicas and replicars exist.

✓

Inspect cowl seam at windshield base — Where windshield meets firewall. Water damage rots wood structure on pre-1939 cars.

✓

Check mechanical brake adjustment (pre-1939 cars) — Mechanical brakes on pre-1939 Fords require specialist adjustment. Convert-to-hydraulic common.

✓

For hot rod builds, verify build documentation — Recognized builder pedigree adds significant value vs hobby builds. Verify build documentation.

Common Issues

Ford coupe rust patterns vary by era. Pre-1939 cars (with wood inner body framing) face wood rot in addition to steel rust — water penetrating through failed weatherseals causes wood to rot from inside, compromising body structure. Common rust zones: lower body panels, running boards, fender attachment points, the rear cargo floor (if applicable), and the cowl seam where the windshield base meets the firewall. Post-1939 all-steel cars rust at the same locations but without wood structure concerns. Mechanically, the Ford flathead V8 (1932-1953) is among the most over-engineered engines of the pre-war era — bulletproof when serviced correctly. Common issues include burnt valves on cars run with poor ignition timing, worn camshaft lobes, oil leaks at the rear main seal, and worn timing gears. Many 1932-1948 Ford coupes have been converted from flathead to post-1954 OHV V8 power (Chevy small-block, Ford Y-block, etc.) for modern performance — verify the conversion was done properly with appropriate motor mounts and engine compartment fitment. The three-speed sliding-gear transmission (1932-1939) is robust but requires specialist knowledge to operate (no synchromesh on first gear, double-clutching required). The three-speed synchromesh transmission (1940-1948) is dramatically more pleasant for daily driving. Many traditional hot rod builds use post-war Ford or aftermarket transmissions for improved drivability. The mechanical brakes (1932-1938) are one of the most safety-critical Ford coupe maintenance items. Failed or poorly-adjusted mechanical brakes are the most common cause of pre-1939 Ford accidents. Brake adjustment requires specialist knowledge — many cars have been converted to hydraulic brakes (1939+ Ford hydraulic system or aftermarket disc brakes). From a concours judging perspective, original mechanical brakes are essential to authenticity on pre-1939 cars; from a daily-driver standpoint, hydraulic conversion is widely accepted. Electrical issues are universal: original 6-volt positive-ground systems on pre-1956 Fords require specific bulbs and components. Many cars have been converted to 12-volt negative-ground systems for modern reliability — verify the conversion was done properly.

What to Look For

Body style verification is the first stop. Three-Window Coupe vs Five-Window Coupe vs Standard Coupe distinctions drive significant value differences. Three-Window Coupes command 25-50% premium over equivalent Five-Window Coupes. Verify the body style code on the firewall dataplate and visual inspection of the side window count. For 1932 Deuce coupe claims, demand specialist authentication. Multiple companies have produced reproduction 1932-style fiberglass and steel bodies over the decades. Original 1932 Ford steel bodies have specific construction details, original Ford date stampings on body components, and chassis number locations that distinguish them from reproductions. Specialist authentication ($300-$800 typical) is mandatory for any Deuce coupe priced over $80,000. Wood structure inspection is critical for pre-1939 cars. Probe the wood inner body framing at the door pillars, windshield post, and rear body corners. Soft, spongy, or rotten wood requires specialist coachbuilding repair. From a concours judging perspective, original-condition wood structure is essential to authenticity; replacement wood reduces concours value. For hot rod builds, verify build documentation and builder pedigree. Period-correct traditional builds from recognized hot rod shops (Roadster Shop, So-Cal Speed Shop, Brizio Street Rods, Pete & Jakes, others) command significant premium over equivalent hobby work. Goodguys Trophy winners, GNRS America's Most Beautiful Roadster pedigree, and SEMA Battle of the Builders awards add documented value. For period-correct traditional hot rod builds, verify the engine and drivetrain specification. Period-correct flathead V8 power (with components like Stromberg 97 carburetors, Edelbrock cylinder heads, finned aluminum intake manifolds, and Mallory ignition) commands premium over modern V8 swaps for traditional-aesthetic cars. Modern resto-mod builds (LS swap, modern brakes, modern air ride suspension) appeal to a different market segment. Document the car. Photograph every panel, every chassis number stamping, every body construction detail (especially on Deuce coupes), every engine bay component, and every identifying tag. Build a comprehensive case file before purchase.

Price Guide

1932 Ford Three-Window Coupe: driver-quality original-condition cars run $80,000-$140,000+. Documented original-paint, low-mileage cars: $140,000-$220,000+. The 1932 Three-Window is the most desirable single Ford coupe ever produced. 1932 Ford Five-Window Coupe: driver-quality original-condition cars run $55,000-$95,000. Documented original cars: $95,000-$160,000. 1932 Ford Standard Coupe: driver-quality cars run $42,000-$75,000. The base Standard Coupe lacks the De Luxe trim of the desirable Three-Window and Five-Window variants. 1933-1934 Ford Coupes: driver-quality cars run $50,000-$95,000. The 1934 model year is the most refined of the era. Documented original cars: $80,000-$140,000+. 1935-1939 Ford Coupes: driver-quality cars run $32,000-$65,000. The 1939 model year is the most desirable of this era (last "early" Ford before 1940 redesign). Documented original cars: $50,000-$95,000. 1940-1948 Ford Coupes: driver-quality cars run $22,000-$48,000. Post-war 1946-1948 cars are slightly more affordable than pre-war 1940-1941 cars. Documented original cars: $35,000-$70,000. Traditional period-correct hot rod builds: prices vary dramatically by builder pedigree. Hobby-built traditional flathead-powered Deuce coupes: $55,000-$120,000. Recognized-builder traditional builds (Roadster Shop, So-Cal, Brizio): $150,000-$350,000+. GNRS America's Most Beautiful Roadster pedigree builds: $300,000-$1M+. Modern resto-mod builds (LS swap, modern brakes, air ride): $80,000-$220,000 typical, with high-end builds reaching $400,000+ for show-quality work. Project Ford coupes start around $20,000-$45,000 across most pre-war years. Stripped roller candidates: $10,000-$25,000.

Did You Know?

The 1932 Ford "Deuce" coupe became the foundational platform of American hot rodding due to three coincident factors: Ford produced enormous quantities (over 270,000 1932 Fords across all body styles), the Ford flathead V8 made hot-rodding economically accessible to ordinary buyers, and post-WWII returning veterans had cash to spend and mechanical skills from military service. The Three-Window Coupe in particular became the most photographed hot rod platform in American history, featured on hundreds of magazine covers from Hot Rod magazine's 1948 launch through modern automotive media. The "Deuce" nickname for the 1932 Ford derives from the 1930s American slang for "two" — referring to the year 1932. The nickname became formalized in hot rod culture during the 1940s-1950s and remains in active use today. Other classic Ford-coupe-era nicknames include "Tudor" (two-door sedan, derived from "two-door"), "Fordor" (four-door sedan), and "Deluxe" (the high-trim 1932-1948 Ford trim level). The Ford flathead V8 powered American performance through the late 1940s and early 1950s, until Chevrolet's introduction of the small-block V8 in 1955 began to displace the flathead in hot rod culture. Period-correct traditional hot rod aesthetic (still actively maintained at events like the Hot Rod Reunion, Goodguys, and GNRS) requires flathead V8 power for authenticity. The flathead remains in active use in traditional hot rod culture and represents one of the most actively-collected pre-war American engine platforms.

Elite Dealer

$54,995