1989 Jeep Comanche

1989 Jeep Comanch 2.5L I4 TBI (fuel injected) - 117 hp @ 5000 rpm, 135 ftlb @ 3500 rpm - used in 86 and updated in 87-90 to 121hp (2.5L became MPI in 91 and was rated for 130hp @ 5250 and 149 ftlb @ 3250) Manual Transmissions AX4 - 4 speed manual - manufactured by Aisin - used 86-92 Transfer Cases The transfer cases used are all chain driven with aluminum housings. NP stands for \'New Process\' which is the brand, if you will. NP231 - \'Command-Trac\' part-time only - 2.72:1 ratio low range - shift pattern 2H - 4H - N - 4L - used 87-92 Axles Front Axles Dana 30 high pinion - reverse cut - 27 spline, 1.16\' diameter shafts, 7.13\' ring gear - used 86-92 (all axles are vacuum disconnect, and have 5-260x u-joints) Rear Axles AMC-20 - 29 Spline, one piece axle shafts, 8.875\' Ring Gear; Metric Tonne axle in 86. Dana 35 non c-clip - 27 spline, 1.18\' diameter shafts, 7.58\' ring gear, 2.62\' axle tube - used 86-89 Gearing 4.10 - used with 2.5L engine usually 4.56 - rare but can be found on some older (~ 89 ~) models with 2.5L Very few blemishes 86,000 miles great interior FIXED UP THESE RETAIL BETWEEN $25,000.00 AND $35,000 Please Note The Following **Vehicle Location is at our clients home and Not In Cadillac, Michigan. **We do have a showroom with about 25 cars that is by appointment only **Please Call First and talk to one of our reps at 231-468-2809 EXT 1 ** FREE Consignment Visit Our Site Today Easy To List Your Vehicle and Get it Sold in Record Time.Trim: PickupBody Style: PickupDoors: 2Fuel Type: GasDrive Type: 4WD