1972 Chevrolet K10

1972 K10 1/2 ton four wheel drive long bed. 350, 4 speed, NP205 transfer case, 3/4 ton axles dana44 in the front and Eaton No- Spin in the rear with 4.11 gears ). Power disc brakes, power steering. Owned and driven often for almost a year but probably only 2000 miles odometer is not working. Drives like a truck and I have used it as a truck but I only cross town occasionally. Has lots of new parts and upgrades, starts, stops, steers, runs well, lights and signals work as they should for driving. Truck is on a salvage title. Somewhere in its life it was hit in the bed and bent the rear axle. The bed has been replaced and so has the axle. I had no problem getting a title, registration or insurance so I really don\'t see a value issue on a 50-year-old truck. Original rust-free Cab - floor, rockers and cab corners are original and in good shape. Other than a couple of small spots starting on the doors the body is rust free. Original classic medium green color inside, remaining turquoise repaint on the outside. Hood and replacement bed were stripped to bare metal and have simple primer. Bed has no filler so some bodywork needed before paint. Bed has new professionally sprayed liner. Needs a windshield. Bench Seat now Foam is good but seats have not been recovered. Floor has factory style rubber mat with added insulation by a previous owner. Originally a 307 according to the tag in the fender it now has a replacement 350 with Weiand aluminum intake, Holley carb with electric choke, HEI distributor, headers and aluminum valve covers. Also has an aluminum radiator with an auxiliary electric fan. Heater is bypassed and I haven\'t needed it. All this was done by a previous owner so I don\'t have any information on miles or cam specs. It looks like a crate motor. They did a nice job and truck runs well. Please Note The Following **Vehicle Location is at our clients home and Not In Cadillac, Michigan.Body Style: PickupDoors: 2Fuel Type: GasDrive Type: 4WD