SOLD on Jun 15, 2026

Elite Dealer

1988 Chevrolet S10

Michigan

$7,495

Vehicle Details

Make

Chevrolet

Model

S10

Year

1988

Mileage

6,000 miles

Body Type

Pickup Truck

Transmission

Automatic

Drivetrain

FWD

Fuel Type

Gasoline

Engine

331 V8 4 Barrel

Description

1998 Chevy S-10 – V8 Swap Project, 331 Camaro Engine, New Parts, Does Not Run This 1998 Chevrolet S-10 is a V8 swap project featuring a 1969 Camaro 331 engine paired with a 10-bolt posi rear end. Many new performance parts included, but the truck does not currently run. Engine & Components 331 V8 from a 1969 Camaro 10-bolt posi rear end 4-row radiator with dual 2000 CFM fans New distributor New Holley 650 4-barrel carb New cam installed Wheels & Tires New tires Cragar wheels Condition Project truck Engine setup is largely in place but does not run at this time Great platform for a V8 S-10 street build or drag project Overall A solid S-10 V8 swap project with quality components already purchased and installed.

Perfect for someone wanting to complete a small-block S-10 build.

Chevrolet S10 Buyer's Guide

Full guide

Robert Halloran

Classic Trucks

1982–2004

~3 min read

Updated Apr 2026

The Chevrolet S10 was America's best-selling compact pickup for two decades — a practical, capable small truck that is now crossing into classic territory with an enthusiast following that appreciates its simplicity, its lowrider heritage, and its growing status as a 1980s icon.

This guide covers

✓ 8-point inspection checklist

✓ Common issues & what to avoid

✓ In-person inspection guide

✓ Market pricing by year & condition

✓ 4 FAQs answered

✓ History & fun facts

Read the Full S10 Buyer's Guide

Chevrolet S10 Market Overview

Based on 18 Chevrolet S10 listings currently on ClassicCarsArena.com

Listed Now

$24,879

Avg. Asking Price

1982–1999

Year Range

Price Position on Our Site — Below Average

This car: $7,495

Low: $9,495 High: $62,995

Transmission Distribution

Automatic 67% ◄

Manual 22%

Condition Distribution

Excellent 33%

Good 6%

Data from ClassicCarsArena.com listings Browse all 18 listings →

Chevrolet S10 Buyer's Guide

Robert Halloran here. The S10 is an interesting case study in how the classic market evolves. Ten years ago, these were cheap used trucks. Five years ago, they were cheap used trucks with a growing fan base. Today, clean S10s — especially the early examples and the performance variants — are crossing $10,000 for the first time, and the trend is accelerating. The people who bought nice S10s three years ago made smart investments.

The S10 ran from 1982 through 2004, making it one of the longest-lived compact truck platforms in American history. It spawned the GMC S15, the Blazer/Jimmy mini-SUV, and established a template for compact truck performance that competitors spent years trying to match. The lowrider and mini-truck scenes adopted it early, and its heritage in those cultures is now part of its collector appeal.

What to Check Before Buying

✓

Cab Corner Rust — Probe cab corners behind the doors — thin metal that rusts through even on well-maintained trucks.

✓

Floor Pan Condition — Check floor pans from underneath and inside — perforation is common on older examples.

✓

4.3L Intake Gasket — Check oil filler for creamy emulsification — a sign of the known lower intake manifold gasket failure on 4.3L V6 engines.

✓

Rear Cab Area — Inspect the rear cab where it meets the bed — rust accumulates in this joint on both generations.

✓

Frame Rails — Check frame rails for surface rust and cracks at cross-member welds.

✓

4WD Engagement — On 4WD models, engage 4WD high and low — both should work smoothly.

✓

SS Trim Authenticity — On claimed SS models, verify factory SS codes on the trim tag — dealer-added badges exist.

✓

Transmission Condition — Test automatic through all gears — 4L60-E (second-gen) is known for solenoid failures on high-mileage units.

Common Issues

Cab corner rust is nearly universal on northern-state first-gen S10s. Floor pan perforation from mat deterioration and water intrusion. 4.3L V6 lower intake manifold gasket failure (causes coolant/oil mixing — a well-known issue with a known fix). Worn front axle U-joints on 4WD models. Automatic transmission (4L60-E on second-gen) electrical issues from age. Rust at rear cab mounts and tailgate corners.

What to Look For

Rust inspection is the primary task: check cab corners behind the doors, floor pans, lower door edges, and the rear cab-to-bed junction. First-gen S10s from northern states are often badly compromised in these areas despite serviceable exteriors. Verify the 4.3L V6 (1988+) doesn't have a collapsed lower intake manifold gasket — a known issue on these engines that causes coolant and oil mixing. On first-gen trucks, check the frame rails for rust at the cross-member welds. Verify 4WD engagement on K-model trucks. Confirm the S10 SS trim is factory rather than dealer-added badges.

Price Guide

1982–1987 first-gen S10, driver condition: $4,000–$9,000. Clean, rust-free first-gen: $9,000–$18,000. 1988–1993 first-gen with 4.3L: $5,000–$12,000. Second-gen (1994–2004) standard: $3,000–$10,000. S10 SS (2003–2004): $8,000–$18,000 for clean examples. Custom or show-truck builds: highly variable, $8,000–$50,000+.

Did You Know?

The S10 was the best-selling compact pickup in America for most of the 1980s and 1990s, outselling the Toyota and Nissan competitors that prompted its creation. The 4.3L V6 in the S10 was literally half of a small-block V8 — GM removed two cylinders from the 350ci V8 architecture to create it, giving the engine exceptional parts compatibility with the V8 ecosystem. The S10-based Blazer was the first compact SUV to find mainstream acceptance in America, predating the "SUV boom" by nearly a decade.

Elite Dealer

$7,495