Elite Dealer

1932 Ford Model B

Michigan

$94,995

Vehicle Details

Make

Ford

Model

Model B

Year

1932

Mileage

600 miles

VIN

SMA454

Body Type

Convertible

Transmission

Automatic

Fuel Type

Gasoline

Description

1932 Ford Roadster Dark Green/Tan Leather Only 600 Miles Exceptional Build One very exceptional show quality car, with tons of chrome and stainless not to mention Eye Ball. Attention every where it goes and told by most local rod builders in the area it’s one of the finest and nicest builds in the area. No expenses spared on this beauty.

Professionally built by one of the best, and only 600 miles since completion. Some highlights on this car feature: Harwood Glass Body, T.C.I. Chassis, Chevrolet 350 Cu. In. Crate Motor, 700 - R4 Automatic Transmission W/Overdrive, Ford 9” W/Coil Over Springs, Front Disc Brakes, Polished Tubular Independent Front Suspension, All Suspension Powder Coated, Chromed or Stainless, Stewart Warner Wing Gauge Set, Custom Leather Interior W/Under Seat Heat, Interior Tonneau Cover, Custom Teak Wood Wheel W/Custom Wheel Cover, Lokar Floor Mount Shifter, W/Tilt Steering Wheel, CD Stereo, 5 Speaker Sound W/CD Stacker.

Please Note The Following **Vehicle Location is at our clients home and Not In Cadillac, Michigan. **We do have a showroom with about 25 cars that is by appointment only **Please Call First and talk to one of our reps at 231-468-2809 EXT 1 **

Ford Model B Buyer's Guide (1932–1934)

Full guide

Jim Vasquez

Hot Rods

1932–1934

~4 min read

Updated Apr 2026

The Ford Model B is the last four-cylinder Ford before the flathead V8 took over — and the body it shares with the Model 18 is the most iconic hot rod platform in American history. Whether you want an original prewar survivor or the foundation for a traditional build, understanding what you're actually looking at before you buy is the whole game.

This guide covers

✓ 10-point inspection checklist

✓ Common issues & what to avoid

✓ In-person inspection guide

✓ Market pricing by year & condition

✓ 5 FAQs answered

✓ History & fun facts

Read the Full Model B Buyer's Guide

Ford Model B Market Overview

Based on 54 Ford Model B listings currently on ClassicCarsArena.com

Listed Now

$49,171

Avg. Asking Price

1932–1934

Year Range

Price Position on Our Site — Above Average

This car: $94,995

Low: $11,495 High: $95,000

Transmission Distribution

Automatic 72% ◄

Manual 13%

Condition Distribution

Excellent 20%

Good 13%

Fair 4%

Poor 2%

Data from ClassicCarsArena.com listings Browse all 54 listings →

💰

What is this car worth?

Check sold prices for the 1932 Ford Model B

Valuation Tool →

Ford Model B Buyer's Guide (1932–1934)

People get confused about the "Deuce" and what the Model B actually is, so let me clear it up. In 1932 Ford offered two mechanically different cars in the same body: the Model B with the carry-over four-cylinder, and the Model 18 with the brand new flathead V8. Both are "1932 Fords." The Deuce legend is built on that body — those sweeping fenders, that low roofline, those proportions that work in every body style from three-window coupe to roadster. If you want an original Model B to preserve as a prewar survivor, that's one car. If you want the Deuce body as a hot rod foundation, that's another conversation entirely. Know which one you're buying before you fall in love with the stance.

What to Check Before Buying

✓

Steel vs. fiberglass verification — Use magnet on flat panels — steel attracts, fiberglass does not

✓

Cowl probe — Probe cowl channel at windshield base for rust penetration

✓

Firewall and floor pans — Inspect firewall and floor pans for rust-through or repairs

✓

Lower rear quarters — Check rear quarter-to-fender seams for corrosion

✓

Door gap evenness — All four door gaps should be even — uneven gaps indicate body damage or twist

✓

Frame X-member inspection — Look for weld repairs or cracks at X-member and front crossmember

✓

Hot rod fab quality — Inspect all custom fabrication — motor mounts, suspension mods, brake work

✓

Chop/channel quality — Assess any body modification for workmanship and filler usage

✓

Flathead cooling — Verify radiator is sized correctly for V8 — flatheads run hot with undersized cooling

✓

Trunk floor — Check trunk floor for water damage from deteriorated lid seal

Common Issues

Cowl rust is universal on unrestored examples. Floor pan deterioration from water trapped under original rubber mats. Lower rear quarter rust at the fender-to-body seam. Trunk floor rust from deteriorated lid seals. On V8-swapped cars, verify the engine mount fabrication quality and cooling system adequacy — flathead V8s run warm and require correct radiator sizing. Frame cracks at the X-member junction occur on hard-driven cars. Fiberglass bodies misrepresented as steel is a documented problem in the market — always verify with a magnet. On heavily modified cars, incorrect front-end geometry can cause handling problems; have any custom-built front suspension inspected before purchase.

What to Look For

Verify steel body vs. fiberglass reproduction — use a magnet on flat panels and tap for hollow sound. Cowl rust at the windshield base is the primary structural failure zone — probe thoroughly. Firewall condition and floor pans. Lower rear quarters at fender seams. Door gap evenness — uneven gaps indicate twisted or repaired body. Frame integrity on any car: look for weld repairs at X-member and front crossmember junctions. On hot rod builds, assess all fabrication quality — frame welds, body work quality on any chop or channel, brake and steering modifications. Verify whether the body is an original steel survivor or has been previously damaged and repaired.

Price Guide

Original steel body alone (restorable): $15,000–$35,000 depending on body style. Original complete car, driver condition: $30,000–$50,000 (Tudor/Fordor); three-window or roadster driver: $50,000–$75,000. Show-quality original three-window: $80,000–$120,000+. Quality hot rod build on steel body with flathead: $40,000–$80,000. Award-winning documented traditional build: $100,000+. Fiberglass-body hot rod builds price significantly lower — $15,000–$40,000 depending on build quality.

Did You Know?

The 1932 Ford body was designed in fewer than 90 days under Henry Ford's direct supervision, reportedly with Henry rejecting multiple proposals before approving the final design. The flathead V8 that debuted in the Model 18 was the first V8 available in a mass-produced American car priced for average buyers — it sold for $460. John Milner's yellow 1932 Deuce coupe in American Graffiti (1973) is widely cited as the most influential single car in hot rod popular culture. The original car still exists.

Elite Dealer

$94,995

1932 Ford Model B

Michigan

Contact Seller

Listed by dealer

Classic Car Deals

ⓘ

Nationwide consignment dealer

Classic Car Deals lists vehicles from owners across the country. The vehicle is at the owner's home — not at the dealer's address. Contact the dealer to confirm the vehicle's actual location before traveling.

⚠

Buying safely?

Read our scam-avoidance tips before paying →

Listing Actions

Browse by Era

Pre-War Classics for Sale

All 1932 Classics

Browse all 1932 Cars for Sale

Model History

How the Ford Model B evolved (1932–1934) — 2 generations.

📈 View Full Evolution