SOLD on Jun 15, 2026

Elite Dealer

1982 Ford F-150

Michigan

$15,995

Vehicle Details

Make

Ford

Model

F-150

Year

1982

Mileage

83,000 miles

VIN

AMS47514

Body Type

Pickup Truck

Transmission

Automatic

Engine

302 V8

Description

1982 Ford F-150 – 302 V8, 83K Miles, Long Bed, Southern Truck Up for sale is a clean 1982 Ford F-150 pickup with just 83,000 original miles. Powered by a reliable 302 V8 paired with an automatic transmission, this truck runs like new and is ready to go. Details & Highlights: 83,000 miles 302 V8 engine Automatic transmission 8’ long bed Southern truck (clean, well-preserved) Runs and drives excellent A solid, low-mile classic pickup that’s ready for work, cruising, or collecting.

Classic Ford F-150 Buyer's Guide

Full guide

Robert Halloran

Classic Trucks

1975–1996

~3 min read

Updated Apr 2026

Buyer's guide for classic Ford F-150 pickups (1975–1996). Dentside, Bullnose, and Aero generation breakdown, frame and cab inspection, engine identification, and current market values.

This guide covers

✓ 10-point inspection checklist

✓ Common issues & what to avoid

✓ In-person inspection guide

✓ Market pricing by year & condition

✓ 5 FAQs answered

✓ History & fun facts

Read the Full F-150 Buyer's Guide

Ford F-150 Market Overview

Based on 24 Ford F-150 listings currently on ClassicCarsArena.com

Listed Now

$23,805

Avg. Asking Price

1951–2001

Year Range

Price Position on Our Site — Average Range

This car: $15,995

Low: $4,995 High: $57,995

Transmission Distribution

Automatic 58% ◄

Manual 21%

Condition Distribution

Excellent 17%

Good 46%

Fair 4%

Data from ClassicCarsArena.com listings Browse all 24 listings →

Classic Ford F-150 Buyer's Guide

Ford introduced the F-150 designation in 1975 as a half-ton pickup positioned between the original F-100 and the heavier F-250 — and it quickly became the most popular vehicle in America. The first three generations of the F-150 span the era when American pickup trucks were simple, repairable, and built to actually work. Today those same trucks are increasingly collectible, and the cleanest examples are disappearing from the affordable end of the market fast.

What to Check Before Buying

✓

Inspect cab corners and lower quarters — Dentside: lower rear cab corners. Bullnose: inner fender and battery tray area. Aero: cab corners and lower door skins. Use magnet to detect filler.

✓

Pull floor mats and check floor pans — Driver and passenger sides. Floor pans rust from below on salt-belt trucks.

✓

Inspect frame rails with flashlight — Under the cab and at rear crossmembers. Probe paint bubbles with a screwdriver.

✓

Test 4WD engagement on 4x4 trucks — Engage both high and low 4WD ranges. Should engage cleanly without grinding.

✓

Check engine oil and coolant condition — Milky oil or white residue in coolant = head gasket. Dark sludge = chronic deferred maintenance.

✓

Identify engine displacement via casting numbers — Verify claimed engine matches firewall data plate.

✓

Test EFI system on 1987+ trucks — Should start instantly and idle cleanly cold. Rough idle usually means IAC or TPS sensor — inexpensive fix.

✓

Check battery tray on Bullnose trucks — Driver-side front under hood. Battery acid accelerates corrosion of tray and inner fender.

✓

Drive at highway speed minimum 20 minutes — Listen for differential whine, transmission slip, driveline vibration.

✓

Document with photos before purchase — Every panel, VIN, firewall data plate, engine bay, frame rails, and undercarriage.

Common Issues

Rust patterns depend on which generation. Dentside trucks (1975–1979) rust at lower rear cab corners, rear quarters, and the tailgate. Bullnose trucks (1980–1986) are prone to battery tray corrosion and cab corner rust. Aero trucks (1987–1996) rust at cab corners and lower door skins. The 300 inline-six is bulletproof across all generations. The 302/5.0L Windsor V8 is equally long-lived; the 351 Windsor runs hot in stock form and needs cooling system attention. The 360 FE big-block in Dentside trucks is reliable but parts are less common. EFI issues on 1987+ trucks are common but inexpensive: idle air control valves, throttle position sensors, and mass airflow sensors age and cause rough-idle complaints. These are $50–$200 parts, not engine problems.

What to Look For

Frame and cab first. Flashlight under the truck, screwdriver to probe frame rails, magnet on the cab corners and lower quarters. F-150s lived as work trucks and the evidence shows. Engine identity second. Verify casting numbers on the block against the claimed displacement. The firewall data plate lists the engine code. Trim level documentation. XLT Lariat trucks carry meaningful premium over base Custom trucks. The trim tag on the door jamb lists the trim code — verify it matches the interior before paying the premium.

Price Guide

Dentside F-150 (1975–1979): $18,000–$38,000 for clean drivers; $48,000–$70,000 for professional restorations. Big-block and 4x4 configurations add $5,000–$12,000 premium. Bullnose F-150 (1980–1986): $12,000–$28,000 for solid drivers; restorations at $35,000–$55,000. XLT Lariat trim adds 15–20%. Aero-generation F-150 (1987–1996): $10,000–$28,000 for low-mileage XLT Lariat trucks. This generation is early in its appreciation curve.

Did You Know?

The Ford F-Series has been the best-selling truck in the United States for 48 consecutive years (since 1977) and the best-selling vehicle for over 40 years as of 2024. The F-150 specifically has led US vehicle sales since its 1975 introduction. The 300 cubic inch inline-six fitted to F-150s appeared on multiple "most reliable engines ever built" lists from mechanics' trade publications. Ford offered it from 1965 all the way to 1996 — 31 years of continuous production with essentially no fundamental changes.