1932 Ford Model T in Riverhead, New York
ID-142831
Send to A Friend
Report this ad
Update date: 03 sep 2025
1932 Ford custom built with a Downs fiberglass roadster body fitted to a TRC chassis that has been painted to match the body. The body is finished in blue and silver and features a custom Duvall windshield. Further details include a raked grille, a power-operated trunk lid, LED taillights, chrome headlight buckets, an open engine bay, and roll hoops for both occupants. The 383ci small-block V8 was assembled with Trick Flow aluminum heads, an Edelbrock intake manifold and dual four-barrel carburetors, and ceramic-coated headers. It is equipped with Trick Flow “Kenny Duttweiler” aluminum cylinder heads as well as MSD ignition and a polished Edelbrock intake manifold with dual four-barrel carburetors. A finned Edelbrock air cleaner lid and valve covers complete the engine bay aesthetics. Cooling is provided by an aluminum radiator, an Edelbrock water pump, and an electric fan. Ceramic-coated block-hugger headers feed a stainless-steel exhaust system with an H-pipe and chrome rolled-tip finishers centrally mounted out back. Power is sent to the rear wheels through a four-speed manual transmission and a 9? rear end with a locking differential and 3.55:1 gears. The Lecarra steering wheel sits ahead of a silver dashboard fascia that houses a suite of Dolphin instrumentation including a 140-mph speedometer, tachometer, and readouts for oil pressure, water temperature, voltage, and fuel level. The cabin is outfitted with Heated bucket seats, upholstered in gray leather and tweed fabric that extends to the doors, side panels, and trunk. Appointments include three-point seatbelts, a tilt steering column, a Hurst shifter, an Alpine head unit and Dolphin instrumentation. The car rides on an independent front suspension with Aldan American coilover shocks, tubular A-arms, and rack-and-pinion steering, while a four-link setup with coilovers is fitted out back. Stopping power is handled by four-wheel discs with Wilwood calipers and drilled/slotted rotors. To cap off this amazing build fittingly, a one-off set of custom billet wheels were built by; Scarallo Motorsport Wheels. Sizes were a massive 20x15 on the rear and 18x10 on the front.
Trim: Highboy 4-Speed
Body Style: Convertible
Condition: Used
Certified: 0
Fuel Type: Gasoline
Would you like to see more convertibles for sale?
Similar Classic Cars
1927 Ford Model T
Featured Listing
CCA-52701
1927 FORD MODEL T THIS IS A NEW BUILD WITH LESS THAN 200 MILES. IT HAS BEEN CHOPPED 4 INCHES, HAS DOOR POPPERS AND ELECTRIC TRUNK, ELECTRIC WINDOWS, 9 INCH REAR END WITH 410 GEARS AND DETROIT LOCKER, NEW 307 ENGINE AND TRANS. NO SHORT CUTS ON THIS...
$40,995
1927 Ford Model T
Featured Listing
CCA-161715
1927 Ford Model T Coupe – 2-Door Fully restored 1927 Ford Model T 2-door coupe, ground-up restoration with many upgrades. Key Features Engine & Transmission: Restored, stainless steel valves Wheels: Wood spoke wheels Starter: Installed for...
$13,995
1929 Ford Model T
Featured Listing
CCA-117164
1929 Ford Model T Hot Rod (on 1939 chassis). I am the third owner and have kept it in perfect condition, always professionally serviced by the best. Very fun to drive and gets a lot of attention! Having been in car shows, I enjoy cruising it along...
$43,995