Sign up for newsletter

1866 Pontiac tempest project that was started 2 years ago It needs the body work & painted, then reassembled to be finished. It has been a body off the frame with the frame & under floor painted, then set back on the frame with all new mounts. All the suspensions bushings front to rear, ball joints, master cyl, brake wheel  cylinders, brake shoes, front brake drums, brake lines & hoses have been replaced from front  to rear. The gas tank & sending unit is new along with the gas line going to the new fuel  pump. The engine is completely rebuilt & came out out of a 1972 Pontiac Catinlina. Its a 400  bored over .030. It was test run on my test stand only before being put into to the Tempest with a turbo 350 behind it. The rear end is the stock Pontiac Tempest that came with  the car when it was originally bought by current owner. The tires on the front are new, 0 miles, rear tires are 3/4 tread. Seats have been redone.  have a new carpet, new rear package tray, head liner &  dash pad to be installed after paint & body work is completed. The door panels & kick panels are driver quality. New firewall insulation, steering column rubber, And all new door panel clipsThe rear wheel wells have been repaired, the complete trunk floor has been replaced along with the drivers front floor pan. The body has been media blasted down to bare medal & then put into primer.Doors: 2
This classic car is on consignment, please contact us for the exact location.

Copyright © 2oo8-2o25 ClassicCarsArena.com. All rights reserved.