SOLD on Jun 15, 2026

Elite Dealer

1978 Chevrolet Corvette

Michigan

$18,995

Vehicle Details

Make

Chevrolet

Model

Corvette

Year

1978

Mileage

60,710 miles

VIN

AAH42392

Body Type

Other

Transmission

Automatic

Fuel Type

Gasoline

Engine

L82 350 Small Block

Description

1978 Chevy Corvette Silver Anniversary Family heirloom. Between my grandfather, father, and now myself we have had the Corvette since the early 80’s. Unfortunately, life circumstances have changed and it’s time for me to move on.

This car deserves someone with the time and resources to make her great. Vehicle starts on demand, runs and drives very well, and sounds like a good old fashioned hot rod. Car was built with L-82 350 Small Block, TH350 automatic transmission, FE7 Independent Rear Suspension and Sway Bars, B2Z Silver Anniversary paint, and Positraction.

Also outfitted with the T-Top convertible style. L82 Specs, 9:1 Comp, 346/360 at.450 lift, Base Timing 12 degree at 900, 16in-HG for Vacuum Mechanical Updates: -Engine has been blueprinted and balanced -Carburetor swapped to Holley Sniper EFI (I still have the original Carburetor) -New Holley Fuel Tank and Fuel Pump for EFI -Replaced intake manifold; Low-rise, dual plane, Quadrajet pattern -New Aluminum radiator with electric fans controlled by Sniper EFI -New water pump, thermostat, and front belts -New Borgenson power steering conversion -New long tube headers and side exhaust pipes (Doug’s Headers) -SMOG and EGR deleted -New spark plugs, wires, and HEI distributor -New Tires Known work to be done given time, space, and resources: -Set Timing to ~12 degrees advanced (Currently set to 8 and runs very well) -Link up kickdown cable on throttle -Fuel gauge is pegged over full, unknown cause -Vacuum hoses need to be reconnected for front headlights and other accessories, not required but nice to have -Fluid change on transmission and rear differential -Brake pads and calipers Please Note The Following **Vehicle Location is at our clients home and Not In Cadillac, Michigan. **We do have a showroom with about 25 cars that is by appointment only **Please Call First and talk to one of our reps at 231-468-2809 EXT 1 **

Classic Chevrolet Corvette Buyer's Guide

Full guide

Mike Sullivan

Muscle Cars

1953–1982

~6 min read

Updated Apr 2026

Complete buyer's guide for classic Chevrolet Corvette C1, C2 and C3 (1953-1982). Birdcage rust, frame inspection, engine code identification, and current market pricing for split-windows, L88s and LT-1s.

This guide covers

✓ 10-point inspection checklist

✓ Common issues & what to avoid

✓ In-person inspection guide

✓ Market pricing by year & condition

✓ 5 FAQs answered

✓ History & fun facts

Read the Full Corvette Buyer's Guide

Chevrolet Corvette Market Overview

Based on 616 Chevrolet Corvette listings currently on ClassicCarsArena.com

616

Listed Now

$39,933

Avg. Asking Price

1953–1999

Year Range

Price Position on Our Site — Average Range

This car: $18,995

Low: $4,000 High: $299,995

Transmission Distribution

Automatic 47% ◄

Manual 37%

Condition Distribution

Excellent 13%

Good 12%

Fair 5%

Poor 0%

Data from ClassicCarsArena.com listings Browse all 616 listings →

Classic Chevrolet Corvette Buyer's Guide

The Chevrolet Corvette has been America's sports car for over seventy years, but the classic Corvette market splits into three distinct generations, each with its own buyer profile and its own pitfalls. The C1 (1953-1962), C2 mid-year (1963-1967), and C3 shark (1968-1982) cover three decades of evolution from solid-axle straight-six convertibles to small-block legends to LT-1-powered chrome-bumper cars. Knowing which Corvette is yours — and what it actually is versus what the seller claims — is the difference between a sound investment and an expensive lesson.

What to Check Before Buying

✓

Verify dashboard VIN against trim tag and engine partial VIN — All three must agree. Engine partial VIN is on driver-side block deck near cylinder head.

✓

Demand original tank sticker for any car over $60K — Glued inside top of gas tank. Lists all original options. Gold standard for premium Corvette verification.

✓

Order NCRS Shipping Data Report ($50) — Available from National Corvette Restorers Society. Confirms original equipment from GM records.

✓

Inspect birdcage at door frames and cowl — Pull door panels, lift carpet at windshield base. Perforation = $8,000-$25,000 structural repair.

✓

Probe frame at kick-up and rear cross-member — Solid steel resists; rotten metal flakes. Frame replacement is $15,000-$30,000 if needed.

✓

Examine fiberglass under raking light — Stress cracks at body mounts, headlight buckets, rear panel. Deep cracks = impact damage or chassis flex.

✓

Check T-top seals and headliner (C3) — Water staining indicates failed seals. Leaks rot birdcage from inside.

✓

Verify Big Block valvetrain on cold start — Solid-lifter L72/L78/L88/ZL1 should tick and subside with oil pressure. Continuous noise = valve adjustment or worn lifters.

✓

Compression test all eight cylinders — Should read 145-185 PSI uniformly across the bank. Variance >15% = head gasket or ring problem.

✓

Test all electrical and pop-up headlights (C3) — Vacuum-actuated headlights commonly fail. Hidden leaks in vacuum lines drop the lights at speed.

Common Issues

Corvette "birdcage" rust is the structural killer for C2 and C3 cars. The birdcage is the steel inner structure that supports the fiberglass body — windshield frame, A-pillars, doglegs, and roof. When the birdcage rots, the body flexes, glass cracks, and door alignment goes off. Birdcage repair on a C2 or C3 is $8,000-$25,000 depending on extent. Frame rust on C1 (boxed steel) and C3 (X-frame) Corvettes is the second major concern. The kickup behind the front wheels, the rear suspension mounting points, and the rear cross-member all rot in salt-belt cars. Probe the frame with a screwdriver — solid steel resists, rotten metal flakes. Mechanical issues vary by generation. C1s commonly have weak Powerglide automatics and tired solid-lifter 283 fuelies. C2s have strong drivetrains but the leaf-spring rear suspension wears bushings and the differential carriers crack. C3s suffer from sloppy T-tops that leak, failing radiators, and worn front coil springs that sag the front end. The L88 cars (1967-1969) had aluminum heads that crack from heat cycling — a deal-breaker if not previously addressed.

What to Look For

VIN authentication is the first stop. The C1 and C2 cars used the dashboard VIN plate; the C3 added the windshield-pillar VIN starting in 1968. Cross-reference the VIN against the trim tag (riveted to the body brace under the glovebox or on the firewall depending on year) and against the engine block partial VIN. Big Block cars (1965+ 396, 1966+ 427, 1970+ 454) and Z06/L88/ZL1 specials must have all numbers matching to claim premium prices. For C2 and C3 cars, inspect the birdcage. Pull the door panels and look at the inner door structure. Lift the carpet at the windshield base and look at the inner cowl. Pull the headliner if practical and look at the roof structure on coupes. Surface rust is acceptable; perforation is structural and expensive to repair. For any high-dollar Corvette claim — L71 427/435, L88, ZL1, Z06, LT-1 — demand the original tank sticker (the build sheet that was glued to the inside top of the gas tank). Tank stickers are the gold standard for verification. Cross-reference the tank sticker codes against the VIN and the engine block partial VIN. Fiberglass condition is uniquely Corvette. Look for stress cracks at the body mount points, around the headlight buckets, and at the rear panel where the bumpers attach. Surface gel-coat cracks are cosmetic; deeper structural cracks indicate impact damage or chassis flex.

Price Guide

C1 (1953-1962) Corvettes range from $45,000 for solid 1958-1962 driver-quality 283 V8 cars up to $300,000+ for documented 1957-1962 fuelie cars in concours condition. The 1953 launch year (only 300 built) is a special case — documented original 1953s sell for $200,000-$400,000. C2 (1963-1967) is the most coveted Corvette generation. The 1963 split-window coupe is the icon — $95,000-$200,000 for drivers and survivors, $300,000+ for documented L84 fuelie cars. 1965-1967 396/427 Big Blocks are $85,000-$180,000 for drivers, with documented L71 Tri-Power cars at $140,000-$280,000. The 1967 L88 is the holy grail — only 20 were built — and documented examples bring $2.5M-$5M at auction. C3 (1968-1982) is the bargain entry to Corvette ownership. Driver-quality 1968-1972 small-blocks run $22,000-$42,000. The 1970-1972 LT-1 (small-block, solid-lifter, 350-360 hp) is the underrated gem at $45,000-$85,000 for documented numbers-matching cars. 1973-1977 cars are the bargain era at $15,000-$28,000. 1978 silver anniversary and 1982 Collector Edition cars trade for $22,000-$35,000.

Did You Know?

The Corvette name was suggested by GM PR director Myron Scott — named after the small, fast warship class. GM trademarked "Corvette" in May 1953, just one month before the car's June launch. The 1963 split-window coupe was a Bill Mitchell design that survived for only one model year. Zora Arkus-Duntov, the Corvette's chief engineer, hated the split window because it killed rearward visibility, and he successfully lobbied to remove it for the 1964 model year. The one-year-only design is now the most iconic Corvette body style ever produced. Only 20 L88 Corvettes were built for 1967, and Chevrolet deliberately under-rated the engine at 430 horsepower to keep insurance companies off the buyer's back. The L88 actually produced approximately 540 horsepower in road-going trim and was conceived purely as a homologation special for road racing — Chevrolet refused to install a heater, radio, or AM/FM in any L88, telling buyers to special-order them at the dealer if they actually wanted comfort features.